asperities

英 [æsˈpɛrɪtiz]

美 [əˈspɛrɪtiz]

n. (尤指语言、态度)粗暴，严厉
asperity的复数

双语例句

If the gouge layer is thin, contact between asperities on the rock surfaces can occur.
如果充填物层很薄，两个岩石表面上的凸起物就有可能互相接触。
Based on the number of asperities on the fault plane, the asperity model was classified into three models: all-asperity, single-asperity and multi-asperity models.
根据凹凸体的数量将凹凸体模型分为三种模型：所有凹凸体，单凹凸体和多凹凸体。
The experiments indicated that asperities of roll surface plow and stick to the aluminum strip surface, and lubrication oil film in deformation zone shields surface topography of aluminum strip are the primary reasons of surface damage of cold rolled aluminum strip.
实验发现：轧辊表面微凸体对铝板表面的犁削与粘结作用，以及变形区内润滑油膜对铝板表面形貌的屏蔽作用是冷轧铝板表面损伤的主要原因。
Far-field body-wave radiation of the fault which contains asperities
含粗糙面断层的远场体波辐射
Agglomerates of delusterant particles located near the surface of sythetic fibers cause asperities.
消光剂颗粒集结在合成纤维表面附近，导致表面粗糙。
The relationship between sliding friction force and contacting condition of rough surfaces was developed according to kinematics and dynamics analysis of two contacting asperities.
从一对微凸体的接触力学和运动学分析出发，建立了非流体动力润滑条件下粗糙表面滑动摩擦阻力与粗糙表面接触状态间的关系。
The highest temperature of asperities is much higher than that of worn plane, which is one of the main factors in leading to stress graphitization on worn surface.
摩擦过程中粗糙表面微凸体的最高温度远大于摩擦平面，瞬时的高温和摩擦剪切力的作用使微凸体被应力石墨化。
Undoubtedly, these asperities will have remarkable influence on surface friction and subsurface stress of the contact area.
齿面粗糙峰的存在无疑会对齿面摩擦力和轮齿接触区次表面应力分布产生重大影响。
However, at higher angle of tooth-shaped asperities and under higher normal stress, the failure model II is found, which is in first tension but final shear failure.
在较高的法向应力下，含起伏角较高齿形节理面的非贯通节理岩体可能出现破坏模式II（先张拉后剪切破坏模式）。
In microscope scale, a rough surface can be regarded as a series of asperities with certain stochastic distributions of asperity height, size and geometry.
从微观角度来看，粗糙表面可以近似地认为是由一系列高度、大小以及几何形状服从一定分布规律的微型粗糙峰所组成，因此粗糙峰之间的接触问题也就成为研究粗糙表面接触问题的关键。