chutes
英 [ʃuːts]
美 [ʃuts]
n. (人或物可顺势滑下的)斜槽,溜道
chute的第三人称单数和复数
柯林斯词典
- N-COUNT 滑道;斜道;溜槽
Achuteis a steep, narrow slope down which people or things can slide.- Passengers escaped from the plane's front four exits by sliding down emergency chutes.
乘客们从飞机前部4个出口处的紧急滑道滑下逃生了。
- Passengers escaped from the plane's front four exits by sliding down emergency chutes.
- N-COUNT 降落伞
Achuteis a parachute.- You can release the chute with either hand, but it is easier to do it with the left.
你随便哪只手都能打开降落伞,不过用左手容易些。
- You can release the chute with either hand, but it is easier to do it with the left.
双语例句
- The irritation of the spurs and the bucking strap often cause the horse to "run blind" and fail to see fencing, posts or chutes.
马刺的刺激和腹带经常会使马“盲跑”,看不见栅栏、柱子或围栏。 - On the other side of the bar, a group of chutes were standing and chatting happily.
酒吧的另一端,站著一羣胖子,高兴地谈天说地。 - Increase in the space factor of chutes for the cable laying.
增加在空间的因素,槽为电缆敷设。 - Specific persons are appointed to clean timely the garbage in the garbage chutes and junk boxes.
对垃圾通道及废料箱中的垃圾设专人及时进行清理。 - An initial check of the spacecraft showed that several pyrotechnic devices failed to fire and deploy the chutes, but the reason for the multiple failures was unclear, Andrew dantzler, NASA solar system division director, said.
美国国家宇航局太阳系分部负责人安德鲁丹泽尔说,对返回舱的初步检查显示几个点火装置点火失败,导致降落伞未能打开,但是导致重大失败的原因尚不清楚。 - The apparatus of the gravity flow of granular materials in chutes was set up.
建立颗粒慢速斜槽流的实验装置,采用示踪颗粒法测定表面速度; - The maximum sinking depth of logs entering water from chutes is derived from regression data processing.
最后对木材入水最大沉深进行回归数据处理,得出试验结论。 - In addition, plans call for a new safety deck featuring state-of-the-art lifeboats, safety chutes and slides.
另外,泰坦尼克二号将会实行新的安全甲板计划,包括最先进的救生艇、安全救生伞和滑梯等。 - In the light of the blocking state of the southern open pit chutes in China, the blocking mechanism is analyzed and researched.
文中结合国内南方几座露天矿山溜井堵塞情况,对其堵塞机理进行了分析研究。 - Asymmetric dual-angle milling cutter used to point chutes, and inclined spiral groove, level surface.
不对称双角铣刀用来铣削角度槽、斜面及螺旋沟、台阶面。