deflections
英 [dɪˈflɛkʃənz]
美
n. (尤指击中某物后)突然转向,偏斜,偏离
deflection的复数
柯林斯词典
- N-VAR 偏斜;偏转
Thedeflectionof something means making it change direction.- ...the deflection of light as it passes through the slits in the grating.
光线通过光栅狭缝时的偏转
- ...the deflection of light as it passes through the slits in the grating.
- (体育运动中球击中某物后的)转向,变向
In sport, thedeflectionof a ball, kick, or shot is when the ball hits an object and then travels in a different direction.
双语例句
- They observed the deflections of the particles by allowing them to fall on a fluorescent screen.
他们让粒子落在荧光屏上以观察他们的偏移。 - The results showed that: both two maximal deflections were at the middle point of end span;
发现两者最大挠度都发生在受火边跨; - And on the right, you notice that there are many of those sharp deflections.
在右侧,大家看到,有很多明显的变位。 - Vertical elements carry sufficient load through cantilever action to produce cantilever deflections equal to arch deflections.
垂直杆件则借悬臂作用产生和拱挠度相等的悬臂挠度,来承担足够的荷载。 - Where required, to examine deflections, stiffness requirements, and any special material and design provisions to obviate brittle fracture under adverse conditions.
必要时验算挠度、刚度要求、以及任一特殊材料和设计规定,以预防不利条件下的脆断。 - The major application of these data is to define the control deflections required to stabilize the vehicle.
这些数据的主要应用是确定稳定飞行器所需要的控制偏角。 - Now the trace you notice on the left side has very few and very sharp deflections.
现在大家注意到左侧的变位,很少但是很剧烈。 - The structural analysis is based on a quadrilateral flat-shell element and an updated Lagrange ( UL) formulation, which can be employed to model geometric nonlinearities arising from large deflections.
结构部分以四边形平板壳元为基础,采用更新的拉格朗日(UL)方法分析结构大变形引起的几何非线性问题。 - However, while some building codes provide methods for estimating shear wall deflections, these methods are not adequate for shear walls without hold-downs.
尽管有些国家的建筑规范中已给出了估算木结构剪力墙侧向变形的方法,但这些方法并不适用于无抗倾覆锚固件木结构剪力墙。 - So the deflections of concrete beams prestressed with bonded FRP tendons are expected to be larger than those of the steel bars cases.
国内外已有试验研究表明,有粘结预应力FRP筋混凝土梁的破坏模式包括界限破坏、受压破坏与受拉破坏三种。
